Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Roof Replacement & Installation in Vero Beach: What to Know First
CGI roof replacement and installation in Vero Beach is work we do as an independent CGI service provider, not as a factory-authorized dealer. Most CGI roof jobs take one to three days once materials are on hand, and the honest price posture is this: a properly installed CGI roof system on a Vero Beach home runs $14,000 to $32,000 depending on roof complexity, decking condition, and which CGI profile you choose. We give you a written line-item quote before any work starts, and that number does not float on you mid-job.
If you own a CGI roof and it is leaking, lifting, or simply at the end of its service life, call (772) 279-7983. We will send a background-checked, uniformed technician who knows CGI fastening patterns, sealant chemistry, and the way salt air works on metal roofing within a mile of the Indian River.
Key takeaways:
- We are an independent CGI installer and repair contractor, not a manufacturer dealer, which means we quote the right fix rather than the factory line.
- CGI roof work in Vero Beach costs between $14,000 and $32,000 for full replacements; repairs typically run $450 to $2,800.
- Warranty coverage depends on fastening method, underlayment choice, and installation quality. We register both warranty layers in writing.
- Call (772) 279-7983 for a free estimate. A live person answers, 24/7.
How CGI Products Fail, and How We Fix Them
CGI roofs are well engineered, but Vero Beach exposes every shortcut. Here are the failure patterns we see on houses from the Miracle Mile corridor to the barrier island, and what we do about them.
- CGI Corrugated panel lifted at the eave line. We see this on homes within a half mile of the ocean. Wind-driven rain gets under the lap at the eave and works the fasteners loose over ten or twelve seasons. Fix: we replace the damaged panels, reset the eave flashing with closed-cell sealant, and re-fasten to CGI’s minimum spacing. No caulking over the problem and calling it done.
- CGI Standing Seam with failed seam clips. The standing seam profiles use concealed clips that allow thermal movement. When a previous installer used the wrong clip or skipped every other one, the seam opens under load and you get a slow weep at the ridge. Fix: we strip the affected seam runs, install new clips at proper spacing, and re-snap the panels. This is not a patch job, it is a re-lay.
- CGI Tile-form panels cracked over a rotted purlin. The tile-form profiles look like barrel tile and hide deck damage. We find rotted plywood or purlins under cracked panels all over older Vero Beach block homes. Fix: pull the panels, replace the damaged substrate, install a high-temp synthetic underlayment, and re-lay the CGI profile. Skipping the substrate repair is how you get a callback in two years.
- Factory-painted finish chalking or fading around the ridge cap. CGI’s Kynar finish is durable, but salt air accelerates wear where water pools at the ridge transition. A dulled finish is usually cosmetic, but if the metal is pitting we replace the cap sections. If it is only surface chalk, we clean and treat rather than sell a roof that does not need to be replaced.
- Roof-to-wall flashing failure where a CGI roof meets a block wall. This is the Vero Beach classic. The original flashing was set in place and sealed, but the block wall settles and the sealant shears. We cut in a proper two-piece counterflashing system and re-seal with a marine-grade sealant rated for direct salt exposure.
Our CGI Roof Replacement and Installation Process
Here is how a CGI job runs when you call us.
- 1
Call and site visit. You call (772) 279-7983, a live person answers, and we schedule a time. Our tech measures every roof plane twice and documents what is there now: panel type, fastening pattern, underlayment condition, and the condition of the existing roof deck.
- 2
Written quote, side by side. We give you a line-item quote on paper. If an OEM CGI panel is the right call, we quote it. If a quality aftermarket panel matches the profile and saves you thirty percent, we show you both. You see exactly what you are buying, with both warranty layers stated in writing.
- 3
Parts decision and order. We tell you plainly when the cheaper unit will hold and when it will not. Then we order. Most CGI profiles are available within one to two weeks through our supply chain.
- 4
Installation. We strip the old roof, repair any rotted decking, lay the new underlayment, and set the CGI panels with proper fastening and sealant. Our crew is background-checked and uniformed, and they work like they are working in their own mother’s house. They are.
- 5
Test and walkthrough. We hose-test the roof, inspect every seam and fastener, and walk you through what was done. Both warranty layers are registered in writing before the truck leaves the driveway.
- 6
Done Right Promise. If anything is not right, we come back and make it right. No paperwork fights. No arguing. If it is not right on the day we leave, it is not right.
What CGI Roof Replacement and Installation Costs in Vero Beach
CGI roof work in Vero Beach is priced by roof complexity, deck condition, and profile choice. Full replacements land between $14,000 and $32,000. Here is the range for the jobs we see most often.
| Job Type | Typical Vero Beach Cost Range |
|---|---|
| Full CGI roof replacement, simple gable, 1,500-2,000 sq ft | $14,000 – $22,000 |
| Full CGI roof replacement, hip or multi-plane, 2,000-3,000 sq ft | $20,000 – $32,000 |
| Partial re-panel after storm or leak (one roof plane) | $3,500 – $8,000 |
| Flashing repair at wall or chimney transition | $450 – $1,200 |
| Decking repair and re-lay of existing panels | $1,800 – $4,500 per 100 sq ft |
What moves the price: how many roof planes, whether the decking is rotted, whether tie-downs need to be brought to current code, and which CGI profile you have. A wise homeowner gets a written quote that includes decking inspection, code updates, and disposal. Call (772) 279-7983 and we will come measure and price it straight.
Why Vero Beach Homeowners Call TruePane Windows and Doors for CGI Work
We have been serving local communities since 2008, and Dale Kessler founded this company in 2008 on a principle that out-of-true installs and voided warranties were problems worth fixing permanently. We are not a franchise playbook and we are not the cheapest bid in the room. We are the last call you need to make. The Keystone Standard means both manufacturer warranty layers are registered in writing, durations stated, and the workmanship is guaranteed for 90 days with the Done Right Promise. If the pane is not true, the job is not done. If a CGI panel is not set right, we fix it on our time and our dime.
When a CGI roof is beyond repair or a homeowner wants to compare options, we also quote PGT, CWS, ES Windows, and ECO Window Systems. We are authorized installers for more than a dozen manufacturer lines, and we put the side-by-side quotes on paper so you can see what you are actually paying for. We show up on time, leave a clean site, and answer the phone when you call. A live person, every time.
FAQs
Yes, in most cases, as long as installation follows CGI’s published fastening and underlayment requirements. As an independent CGI service provider, we match fasteners to the profile, use the correct sealant chemistry, and document the install in writing. If the original warranty is still active, we register our work so there is a clear paper trail.
Most full CGI roof replacements take one to three days once materials are delivered. That includes tear-off, deck inspection and repair, underlayment, panel installation, and cleanup. Call (772) 279-7983 and we will give you a written schedule with a start date we honor.
We quote both. For current-production profiles, OEM CGI panels preserve the manufacturer’s color and profile match. For discontinued profiles, a quality aftermarket panel can match the profile at a lower cost. We show you both prices and let you decide. We do not push aftermarket parts when the OEM part is the right call.
If the roof deck is rotten or the tie-downs need to be brought to code, that changes the price. We cannot see through the panels any better than you can. What we can promise is this: we show you the rot, tell you what it costs to fix, and get your approval in writing before we do the work. No surprise line items on the bill.
If the panels are intact and the leaks are at flashing transitions, repair usually makes sense and runs $450 to $2,800. If the panels are lifting, cracked, or the deck is soft in multiple places, replacement is the honest answer. We will tell you which one you need, even when the cheaper option is the right option.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Vero Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.