Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Installation Across White City
A new exterior door in White City, FL typically runs $1,200 to $4,800 installed, depending on whether you’re swapping a standard swing door or reframing an opening for impact-rated glass. Most jobs in this part of St. Lucie County take one to two days once the permit clears. TruePane Windows & Doors has been setting doors in White City homes long enough to know the county’s permitting process cold, and we quote every job in writing before the first tool comes off the truck. Call (772) 279-7983 and a live person answers, day or night.
White City is not a city at all. It’s unincorporated St. Lucie County, which means every permit runs through the county building department, not a municipal office. That single fact trips up out-of-area contractors routinely. We’ve corrected enough of their stalled jobs to know exactly where they go wrong. If you live on Oleander Avenue, near the Indian River Lagoon, or off Midway Road in the older CBS-block sections, you already know what salt air and hurricane seasons do to a door frame. We do too.
Why TruePane Windows & Doors Is White City’s Preferred Door Installation Company
White City homeowners tend to stay put. They remember Frances and Jeanne in 2004, two direct hits in one season, and they saw what non-impact doors cost their neighbors. That’s why our crews in this area spend most weeks replacing original aluminum and jalousie doors with impact-rated units that meet St. Lucie County’s wind-borne debris requirements. We don’t sell the cheapest door. We sell the last door that opening needs.
Dale Kessler founded TruePane in 2008 on a rule that still sits on the whiteboard: if the pane is not true, the job is not done. Background-checked, uniformed technicians measure every opening twice. We register both manufacturer warranty layers in writing before the truck leaves your driveway. That’s the Keystone Standard, and it applies to every door we set in White City. The Done Right Promise backs it. If it’s not right, we make it right. No paperwork fight.
We dispatch and schedule from our South Florida metro office, but the crews working your neighborhood live and work in this county. They know the St. Lucie County product-approval list, the notice-of-commencement filing, and the inspection scheduling quirks. That local knowledge is why White City homeowners call us first. Reviews from this area mention the same things: the crew showed up when they said, the permit passed first try, and the door closes like it’s supposed to.
Call (772) 279-7983 for a free estimate. A person picks up. No phone tree, no callback form.
Our Door Installation Services in White City
Our Door Installation team handles everything from a single entry door replacement to full multi-opening projects on acreage properties. In White City, most homes fall into one of two camps: 1950s to 1970s CBS block construction with original aluminum frames, or newer homes built after the county tightened its impact requirements. We quote both honestly.
Entry & Swing Doors
A front entry door in White City does two jobs: it seals against salt-laden humidity off the Lagoon, and it holds against design wind pressures most of the country never sees. We set fusion-welded frames with compression weatherstripping and multi-point locks. For homeowners near the water, we recommend galvanized or stainless hardware over standard steel. The salt air off the Indian River Lagoon eats cheap hinges in under three years.

Double & French Doors
Double doors are common on White City pool-facing walls and patios. They’re also the opening most likely to fail county inspection when set by an unfamiliar crew, because the active leaf and astragal have to meet the same impact rating as the fixed panel. We pre-hang and shim both leaves square, adjust the sill for drainage, and make sure the threshold profile matches St. Lucie County’s flood and wind requirements. You get a door that doesn’t bow in July downpours.

Storm Doors
A storm door in White City is not just a screen. Given the county’s wind-borne debris region designation, the exterior door assembly needs to work as one system. We install storm doors that meet current code and register both warranty layers on the spot. For older CBS homes with shallow overhangs, we lap the sill flashing correctly so wind-driven rain can’t wick into the subfloor.

Bifold & Folding Doors
Bifold and folding door systems show up on newer White City houses and on renovated ranch homes where owners opened the back wall to the yard. These openings put a lot of weight on the header and track. We verify the lintel and rough opening before we quote. If the original framing was never designed for a folding system, we tell you that in writing and price the reframing work honestly.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in White City
We’re an authorized installer for more than a dozen manufacturer lines, and in White City we work heavily with PGT, CGI, and Ply Gem. Those three make impact-rated door systems that hold up to St. Lucie County’s design wind speeds and salt-air exposure. Because we install them regularly in this area, we know the product-approval numbers off the top of our heads. That means your permit application goes through without the county kicking it back for a missing approval. We also stock common sill pans, thresholds, and replacement hardware locally, so a follow-up adjustment doesn’t mean waiting on a parts truck from two counties over.
Common Door Installation Problems We See in White City Homes
- Sagging jambs from salt-air exposure. Homes near the Indian River Lagoon and along Indian River Drive deal with constant humidity and airborne salt. Original wood or thin aluminum jambs corrode and sag, leaving the door binding at the top corner. We pull the old jamb, reframe to square, and set a fusion-welded frame that won’t move.
- Failed county inspections due to missing product approvals. Out-of-area installers skip St. Lucie County’s specific product-approval requirement. The permit gets rejected before the job even starts. We file product approvals with the permit from day one, so inspections clear the first time.
- Pulling jamb screws from irregular CBS cores. White City’s 1950s to 1970s concrete block homes have irregular block cores. A crew that treats CBS like wood framing strips the screws and leaves the door loose within a year. We use the right anchors and shims for block, and we verify the rough opening before we set anything.
- Wind-driven rain wicking at the sill. Mid-century White City homes have shallow roof overhangs. If the flashing is lapped wrong at the sill, water gets behind the threshold and rots the subfloor. County inspectors flagged this constantly after the 2004 hurricane retrofits. We lap the peel-and-stick membrane and flashing tape in the correct order, every time.
Pricing for Door Installation in White City, FL
A single entry door replacement in White City runs $1,200 to $2,800 for a standard swing unit, including removal, shimming, insulation, and trim. A double French door on a pool-facing wall runs $2,800 to $4,800 installed, depending on the impact rating and whether we need to reframe the rough opening. Storm doors run $600 to $1,400. Pivot doors and custom arched units start around $4,000 and go up from there. The county permit fee and notice-of-commencement filing add roughly $150 to $300, and we handle both for you. No change orders appear mid-job, because we measure twice and quote manufacturer lines side by side on paper before you sign anything. Call (772) 279-7983 for an exact quote. Estimates are free.
| Door Type in White City | Typical Installed Range |
|---|---|
| Entry & Swing Door | $1,200 - $2,800 |
| Double & French Doors | $2,800 - $4,800 |
| Storm Door | $600 - $1,400 |
| Bifold & Folding Doors | $2,500 - $6,000+ |
| Pivot Door | $4,000 - $9,000+ |
How County Permitting Shapes the Price in White City
Building on acreage around White City means county rather than city permitting, and that changes the quoting game. St. Lucie County’s building department reviews every exterior door replacement for wind-borne debris compliance. If you’re adding a detached workshop with a man-door, that opening needs the same impact rating as the house. Septic and well setbacks don’t usually affect a door swap, but grading and drainage on an open lot do, especially if the door sits at grade and the surrounding soil drains poorly during summer storms. We scope all of that before we quote, so the price we give you is the price you pay.
One more local detail that matters: because White City is unincorporated, every permit application runs through St. Lucie County rather than a city hall. Out-of-town crews miss the county’s specific product-approval step. Their permit stalls, the homeowner waits, and the job dies. We file the product approvals with the permit on day one. County inspectors know our work. It’s why neighbors in White City pass our name along.
We Also Serve Cities Near White City
If you’re outside White City proper, our crews cover Vero Beach, South Beach, Vero Beach South, and West Vero Corridor as well. The same county rules and salt-air conditions apply across much of the area. Learn more about our full-service coverage at White City or call (772) 279-7983 and ask for a door estimate.
Serving White City, FL - Our Local Coverage Area
We’re based in the White City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in White City
Yes, St. Lucie County requires a permit for any exterior door replacement in White City, because the area lies in a wind-borne debris region. The permit typically takes 1 to 2 weeks to clear once we file it with the correct product approvals and notice of commencement. We handle the entire filing for you, and most door swaps are installed in a single day after the permit is issued. Call (772) 279-7983 and we’ll walk you through the exact timeline for your street.
Yes, we can. The original rough opening in a 1950s CBS home is usually wide enough to accept a modern pre-hung impact door, but the block cores are irregular and the old jamb usually needs to be pulled and the opening reframed square. We shim with the right anchors for block, not wood studs, and we flash the sill so wind-driven rain can’t get behind the threshold. The result is a door that closes with one finger and passes county inspection the same week. Call (772) 279-7983 for a free on-site look.
For a pool-facing door exposed to salt air off the Indian River Lagoon, we recommend a fusion-welded vinyl or aluminum frame with stainless steel hinges, a multi-point lock, and a composite threshold. Cheap steel hardware corrodes within three years on the water side of White City. We spec the frame and hardware for the salt load on your specific lot, not a generic coastal package. Call (772) 279-7983 and we’ll quote the right materials for your exposure.
Yes, St. Lucie County requires any exterior door on a detached structure to meet the same wind-borne debris and impact requirements as the house. That includes a man-door on a workshop, garage, or ADU. We file the product approvals and permit for the workshop door exactly as we would for the front entry, and we lap the sill flashing correctly for the open-lot drainage conditions on your property. Call (772) 279-7983 for a quote on the whole project.
A soft bottom corner on a 1972 front door in White City usually means water has been wicking behind the threshold and into the subfloor for years, not just old age. The fix is not a new door only. We pull the threshold, inspect the subfloor and rim joist for rot, replace what’s bad, and then lap the flashing correctly before setting the new door. If we skip that, the new door rots the same way. Call (772) 279-7983 and we’ll inspect it honestly, free of charge.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving White City, FL and surrounding St. Lucie County communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After